What To Do When Windows 7 Freezes Booting?
A lot is anticipated from Windows 7 by many of us. Several people may point out that Microsoft has learnt some lessons from Windows XP and Window Vista launches. We are still facing the old set of issues that we came across in the earlier windows operating system. One major issue we came across from our users is that Window 7 freezes while booting.
This issue is normally because of the USB connection problem, therefore what you need to do is to detach every one of the USB cable connections and reboot the system. As soon as the computer completes reboot process, integrate a USB connection and then leave this for some time to find out if this link creates a problem.
You might also wish to reboot your system to find out if this relationship brings about freezing while rebooting your computer. Subsequently, carry on this procedure by connecting as well as removing every USB device individually until you can recognize the location where the hardware disappointment is arriving through. The problem is generally the effect of a wireless computer keyboard or even computer mouse or dongle. However, it can be the other device as well.
In the event you have observed that the issue is originating from wireless keyboard and mouse then you will have to examine your computer to find out that the “USB keyboard and mouse support” is enabled in BIOS setting. If this option is enabled then disable it to solve this issue.
Trick To Increase The Booting Time On Networking Computer Systems
Computer Systems take more starting time if they are connected on a “Shared Network”. Sharing a network means that your computer system is associated with a group of systems or it is an integral division of computer systems network.
These decreases the booting time severely and a computer system starts behaving strange on certain occasions. Sometimes it consumes more than two minutes of your time (General Statistics) to boot up, and once you are logged on, you’re logged account halts down for a couple of minutes.
Individuals might also sight blank window screen with no icons displayed for some indefinite time and all this occurs because a computer attempts to utilize all its inventories in establishing a connection with the networking computer systems.
This is mostly due to “Microsoft’s printer and file sharing program”. It utilizes many resources on computer, since it attempts to gain access to other computer files, drives and any connected hardware devices like printer etc.
It consumes around “65 seconds to 01 minute” of system booting time, hence individuals are made to hold back for a lengthier duration to gain entry to computer system.
This tiresome booting behavior on computer systems can be improved by disabling printer and file sharing option.
Steps required in disabling printer and file sharing option on networking computers are as follows:
- Select windows start option and highlight “my network places” option and press a right mouse click and select the last option called as “properties”.
- Now, highlight and press a right mouse click on “ethernet adepter connection” option and select the last option called as “properties”.
- Now, in this window uncheck the option named as “printer and file sharing for Microsoft-Networks” and select the “OK” and “Apply” button to save the settings changes made.
- Now Restart your computer system to get the changes made on computer system.
Hereafter, individuals can experience significantly quicker booting time. If in case individuals are required to have printer and file sharing connection established in future, they can just follow the above illustrated steps and just check the option “printer and file sharing for Microsoft-Networks”. It will get enabled automatically on next computer system restart.
Use Diskeeper HyperBoot To Speed Up Pc’s Startup, Boot And Shutdown Process
If your system takes a lot of time to boot, here is an interesting solution to this issue. Diskeeper has come up with HyperBoot which is useful software that speeds up your PC’s booting process by decreasing the startup time. Once you start using Diskeeper HyperBoot, your PC’s start up time will be reduced by 54% thereby increasing your system’s performance by 118%.
Diskeeper HyperBoot delivers amazing results which has been actually proven by a live lab test where the standard system did boot only 11 times versus the 24 boots with Hyperboot. This software offers faster boot, start up and shutdown time.
Diskeeper HyperBoot basically reorganizes Windows Boot data in order to allow easy access to all the necessary information required during the boot period. This is why the time taken for execution is less as compared to a standard system. HyperBoot speeds up the shutdown process of your system by remapping the necessary data.
Diskeeper has collaborated with Asus for developing an innovative “Instant On” technology with an intention that users do not have to wait patiently during system boot, startup or shutdown period. Currently, you can use Diskeeper HyperBoot with Windows 7 and XP Operating Systems.
Alternative ways to run a PC in safe mode
The shortest and easiest way to boot a PC in safe mode is by pressing F8 button. Well, sometimes we face some major problem to boot in safe mode when F8 button fails to work. Since we all know that no one can really give a ion clad guarantee on an electronics product, so we just have make a few adjustments to sort out needs. There are alternative ways to boot a machine in safe mode other than pressing F8 key.
The below mentioned steps are the alternative ways booting a machine in safe mode:
- For Windows XP through msconfig
- Your computer should first run in normal mode.
- Click on Start, from Start menu present at the extreme bottom left hand side corner, and then click on Run.
- Then press the Enter key after typing msconfig in the blank space.
- Look for BOOT.INI tab, once you got that then click on it and then look for SAFEBOOT and click on the check box.
- Now you have to check the option named MINIMAL, if it is already checked then it is fine else you need to check it.
- Then select Apply button and click on OK to finish.
- Your work is done and when you will restart your machine then it will automatically run in safe mode.
Now if you are willing to run the machine again in normal mode then you just have to uncheck the MINIMAL and SAFEBOOT and then click on apply and then OK to finish the process.
- For Windows Vista through msconfig
- Make sure your computer is open in normal mode at first.
- Click on Start button and then click on Run option.
- After you typed msconfig. Hit on Enter.
- Select the boot tab and Safe Boot box should be checked.
- Check the Minimal option too.
- Click on apply and ok to finish the process.
- Once the above 6 steps are completed your work is done.
Once you restart your machine, your computer will always run on Safe Mode whether you press F8 or not. If you are willing to bring back the normal mode then you just have to uncheck all the checked option, just as it was before.
- BootSafe: It is a third party tool which is available for free of cost. It is much more prominent and easiest way to run a PC in safe mode because it itself provides you with the option to restart your machine in either normal mode or safe mode. You don’t even need to install the software. All you have to do it to open and run after downloading the software.
- The first step is just the same as before. Make sure your computer is running on normal mode.
- Open BootSafe either by double clicking on the icon or right click on the icon and select open.
- Click on Safe mode option to check it and then the minimal option too.
- Restart your machine and your work is done.
- Open BootSafe and check normal restart to bring it back as it was.