Connect Two Computers with LAN

How to Connect Two Computers with LAN?

These days, we have to connect computers with each other for several reasons. You might want to set up a Local Area connection inside your office using either your desktops or laptops. If you are a student, you can also interconnect more than two computers to play games.

There are numerous solutions to accomplish this task. Generally, this procedure could be divided into two parts, wireless and wired LAN. Here, you will find out how to connect two computers.

For connecting two computers through wired LAN, there must Ethernet card installed on every computer. These days almost all the manufacturers provide pre installed LAN card on their motherboards. In case there is no LAN card installed on your computer, you can get one done easily. These cards are similar to the video cards and you can install them effortlessly on the slot provided in the motherboard.

After installing the LAN cards on your computer, the next step is to connect the LAN cable with the computers. For these kinds of connection, crossover cable is needed.

Now you have to set up your computer to connect to each other. Let us assume that the computers are working on Windows XP. Now follow these steps

Click Start > Right Click on My Computer > then Click on Properties

 

Then, from the top menu click on tab named as “Computer Name”

 

Now, click on “Change” button just below the “Network ID” and a new window will pop up.

You will then find a “Computer Name” field. Remember to give a name, which you gave while installing window XP, otherwise it will give a default name. Therefore, it will be better to assign names as system_one, system_two and so on.

There you will find “Member of” field, in which you will find “Workgroup” option. It will have a default name “MSHOME”, you can assign all other subscribers with this group and press “OK”

Your one computer is configured now and you’ll need to repeat the same procedure for the second one. Make it sure to keep the same workgroup with other computers, names can be different.

After configuring both computers, you’ll need to physically connect them.  Plug crossover cable in LAN port of both computers.

Now from the “Start Menu” open “Control Panel” > Click > “Network and Internet Connections”

From the “”Pick a Control Panel icon” > Click > “Network Setup Wizard”

Later, you will find “Welcome to the Network Setup Wizard” page, go to the bottom and right Click > “Next” bottom.

Click Next button again. On doing so, you’ll get the window with three options in it, select the radio button with “This computer connects directly to the internet. The other computers on my network connect to internet through this computer” and Click > Next.

After finishing the wizard from the control panel open “Network and Internet Connection” and Click >Network Connections”

Double click on “Local Area Connections” and Click on “Properties”

Now from the “This connection uses the following items” scroll the bar down and Double Click on > “Internet Protocol (TCP/IP)”

You will observe that the default option is selected as “Obtain an IP address automatically”, check on the “Use the following IP address” option and change it to IP address of your own choice such as 192.168.1.1. Remember to use different IP address for different computers. The next tab will be of “Subnet Mask” and use “255.255.255.0” which will automatically comes after entering IP address. Both computers should have same “subnet mask.” IP configuration window will be as follows.

Then, click on “OK” button.

Our Conclusion

 

  • Plug Crossover cable into the LAN port of both computers
  • Click Start > Control Panel > Network and Internet > Network and Sharing Center
  • Click the Unidentified Network from the Network Map
  • Then Click > Turn on network discovery and file sharing.
  • From > Network discovery and file sharing select
  • No, make the network that I am connected to a private network
    • OR
  • Yes, turn on network discovery and file sharing for all public networks

Get Connected with Your Personal Computer wherever you are Using icloud

Get Connected with Your Personal Computer wherever you are Using icloud

Computer plays vital role in our daily life. However, maximum people use computer in their offices for their official work. What happens if you are out of station, and if you need to access your important details from your office computer?

In this case you can access your office computer wherever you are by using icloud application. It is really useful in the existing scenarios and because of its utility people start using this application freely.

This application allows user to get access their computer remotely, it features virtual desktop to the users. All you need to have internet connection to use this application. It is really innovative technology which especially designed to meet the requirements of people.  Even you can access your computer remotely on your PDA with this application.

This icloud appears as same conventional desktop but it runs on online cloud. It means now there is no need to copy contents in pen drive and bring it with you always wherever you go. Suppose if you forgot your portable device then what will happen. Therefore, icloud is the best alternative solution for this problem of getting important information from compute which is placed remotely.

This application contains a virtual desktop with all files and applications that are accumulated in cloud, and it offers various features to the users such as real time collaboration, sharing, and many other applications.

 

Now you must be wondering which operating system is used in this icloud desktop application. In this application Xcerion XML Internet OS/3 (XIOS/3) is used.  The upgrading of this application is going on regularly. You will get more features in icloud such as productivity tools, entertainment, games and finance tools in future.

Another important feature is especially for those people who have programming background. They can modify this application by using modification feature in order to meet your requirements.

Knowing unlimited features of this icloud software, you would like to use icloud. So, download it from the internet and install it in your computer to use it. There are multiple websites available that offers download option of icloud. You can download it from there.

Connect Remote Desktop Protocol (RDP) Client To Localhost

Useful Tricks For Connecting Remote Desktop Protocol (RDP) Client To Localhost

Windows XP users must have noticed that while trying run the Remote Desktop (RD) Client to establish a RDC (Remote Desktop Connection ) with the localhost (i.e. on the own computer itself) via the Terminal Server service, the RDC session either cannot be established or gets disconnected giving an error message. (This post will help you fix the problem of Remote Computer Disconnected the session because of an error in the Licensing protocol in Windows Vista. )

The error message notifies you that the RDP client was unable to connect as the user is already connected to PC’s console and a new session can’t be established.

Basically, the behavior of the Remote Desktop service in Windows XP prevents a Remote Desktop Connection from being established with 127.0.0.1 or locahost. Generally, users who wish to have two sessions on the console or want to tunnel RDC through encrypted Secure Shell (SSH) try to establish a RDC with the localhost.

Sometimes users also attempt to establish RDC with the localhost in order to check whether the termsrv.dll patch has worked to unlock the restriction on concurrent RDC sessions.

However, it is possible that you enable Remote Desktop so as to connect to the localhost for establishing another desktop session. Below mentioned are a few methods that you can apply.

Method 1: Connect RDC to IP address 127.0.0.2

The trick can be used with Media Center Edition and Professional (Pro) Edition of Windows XP released prior to XP SP2 (Service Pack 2). The IP address 127.0.0.2 is an internal TCP/IP loopback IP address and RD service in Windows XP Media Center and Pro editions prior to SP2 support connection through this loopback address.

However, connection via localhost or 127.0.0.1 string is actively blocked.

Method 2: Connect to Terminal Services using another Non Standard Port.

By this method you may establish a RDC with the localhost (or 127.0.0.1 address) by using another non standard port rather than the default (i.e. 3389) one. This trick is useful in XP SP2 & SP3 versions which do not support localhost connection through 127.0.0.2 loopback IP address. RD listens and connects using the port 3389 by default.

Hence, to use this method you need to first change the listening port.

Method 3: Run RDC (mstsc.exe) Simulated as being run from a different Operating System

In this trick you actually make Terminal Services to think that the RDP Client which is trying to establish a connection with the localhost is from a different operating system, ultimately indicating that the RDC is from a different remote computer. Follow the below mentioned steps:

  • Create a folder named “RDC” in C drive.
  • Navigate to the folder “C:\Windows\System32\ and copy the files “mstscax.dll” and “mstsc.exe” to the newly created folder (i.e. to C:\RDC).
  • Now go to “C:\RDC”, right click on the file “mstsc.exe” and select the option “Properties” from the right-click context menu.
  • Go to the tab “Compatibility”.
  • Check (Tick) the checkbox corresponding to the option for running the program in a compatibility mode for the chosen OS and select Windows Me/ Windows 98 OS from the dropdown list.
  • Then, click on the button “OK”.
  • Double-click on “mstsc.exe” in the “C:\RDC” folder so as to run RDC and now the RDP client will be able to connect to 127.0.0.1 address or localhost.

You need to remember that, when you log on to the RD session, you need to log on as a different user. Otherwise, you might be forcibly logged out.

Use Connectbuddy Stay Connected With The Internet With No Interruption Due To Inactivity

Use Connectbuddy Stay Connected With The Internet With No Interruption Due To Inactivity

When you work with some tasks on your computer which do not requires an Internet connection, then this time span is called as period of inactivity. Most of the Internet Service Providers (ISP) disconnects your net connections when you stay in this period of inactivity for a long duration.

In this period of inactivity, any type of data transfer doesn’t occur and your internet connection becomes idle. When the ISP server notices this, they automatically disconnect your PC’s connectivity with the internet. However, when you come to use the internet connection again, you’ll notice this disconnected status, and this situation can be very annoying too. 

To avoid such hassles, you should make use of a freeware namely ConnectBuddy. This freeware utility helps you to stay connected, still after an inactivity period. The “ConnectBuddy” is pretty useful software program which simulates the Internet activity and avoid disconnection of internet connection from ISP.

There are few ISPs which disconnect you when you stay away from your computer for just few minutes or take a little more time to read a Web Page. Even some ISP accounts with access to unlimited internet connection also get disconnected when they stay in period of inactivity.

After installing the ConnectBuddy, you will see a small icon of this software in the system tray. It helps you to remain online by retrieving the data periodically over your internet connection. It also makes small mouse movements in particular intervals of time of your preference.

Anyone can use this program very easily without any special configuration or technical knowledge. The program starts automatically when your computer is restarted. ConnectBuddy is extremely useful program with which you can read the web pages for longer time and also leave your computer in idle mode for longer periods. It supports Windows 95, 98, ME, NT, 2000 along with Windows XP operation systems.