Fix Errors While Upgrading Windows Vista to Windows 7

How to Fix Upgrade Errors (Repeated Restarts) While Upgrading Windows Vista to Windows 7

It is quite obvious that people would want to upgrade their old version of operating system to new version. It really is discomforting when you encounter problem while upgrading your system. The users of vista operating system are facing problem while upgrading their operating system to windows 7. 

This problem causes frequent restarts of system that is very irritating. Many people find it very.  Annoying and complicated while upgrading their vista to windows 7, because of these upgrade errors (Repeated Restarts/Reboot).

Users get message that your upgradation process failed and previous version restored you can continue with it. There is a specific notification message will be shown on screen “This version of windows could not be installed, your previous version of windows has been restored, and you can continue to use it”.

 

This message will be shown on screen every time when your upgradation process fails. It is a very irritating problem. The worst thing is that no specific reasons have been discovered until now behind this upgradation failure. However mechanism of this failure is clear that when you launch upgradation process, Boot Configuration Database (BCD) adjust itself to default windows 7 operating system.

As Upgrading process fails system restore your previous operating system, however BCD continues to make windows 7 your default operating system and proceed to windows 7 setup again and again. Therefore your computer reboot repeatedly.

Now you can get rid of from annoying problem by changing settings of BCD.  If you change the values of BCD, your system will be started with vista operating system, and you will be free from repeated restarts upgrade errors immediately.

Steps to fix upgrade errors

  • Primarily, start your computer.
  • You would see boot menu option during booting (press F8 button if you don’t see), select Vista operating system instead of Windows 7.
  • Insert Vista set up files (download vista SP2 ISO) and exit from the set up menu when installation menu open.
  • Go to Start>All Programs>Accessories>right click on Command Prompt>Run as Administrator.
  • type “X:\boot\Bootsect.exe /NT60 All in command prompt tab and press Enter button ( X is the directory where you have inserted vista setup file)
  • Restart your computer.
  • The job will be done successfully and your system will not keep the booting again and again

Fix The Issues While Viewing Videos In VLC Media Player

How To Fix The Issues That You Get While Viewing Videos In VLC Media Player 

It may be possible that you will get trouble using VLC media player on windows vista. Actually VLC media player requires DirectX to be installed properly.

Sometimes people remove all installed applications to get installed VLC media player. Even many people change default settings to remove that problem of VLC media player, which is not really considered the right way to resolve this problem.

Mentioned below, you will find the instructions to install VLC media player properly in order to fix the problem:

  • First of all you have to open VLC application then go to settings, then choose preferences option

  • Now choose video option and click output modules
  • You will get advanced options box on your screen
  • There is DirectX video output option in the list
  • Finally click save option
  • Restart your VLC media player

Now you should be able to watch your favorite movies of any format in your VLC media player. VLC media player supports almost all the video formats, therefore people choose this player to watch their favorite videos on this particular player. 

All you need is to follow the abovementioned steps to install VLC media player properly. This method really helps you to enjoy the videos in your free time, since is the best player which plays all the video files. Therefore, you need to follow these steps to install VLC player precisely.

Fix error code: 0xC004F061 Activation Error for Windows 7

Fix error code: 0xC004F061 Activation Error for Windows 7

When Windows 7 is activated, many people face an activation error code 0xC004F061. This error code indicates that Windows 7 product key is used for upgrading on such a machine where previous version was not installed.

The upgrading activation code or product key is only used when you want to update the Windows from Windows Vista or XP to Windows 7. In case you don’t have any previous installed Windows and you are trying to use the product key for upgrading, then you will be provided with an error code 0xC004F061.

 

In order to use the product key you need to have earlier version of Windows. Never uninstall or format the drive before using the product key. You have to install the earlier version of Windows to upgrade the Windows to Windows 7 in case you have uninstalled the drive before upgrading.

Fix the Boot Screen Issue To Restore The Animated Boot Screen In Windows 7

Fix the Boot Screen Issue To Restore The Animated Boot Screen In Windows 7

Windows 7 has a high resolution animated boot screen which is quite dynamic and elegant in contrast to Windows Vista which has an uninteresting boot screen with a black background and green progress bar. Windows 7 users must have noticed that the high resolution boot screen sometimes gets replaced with the dull Vista boot screen.

This mostly happens when you accidentally use a Windows Vista DVD while trying to repair the items in the Startup menu. The main cause behind this invalid boot screen in Windows 7 is a missing locale entry within the boot record. When a locale is found to be missing, Windows boot loader is unable to locate the boot locale folder for displaying the animated boot screen.

For resolving the issue with invalid boot screen in Windows 7, you need to run any of the below mentioned commands in the command prompt with elevated admin rights.

  • bcdboot %WinDir% /l en-US”
  • “bcdedit /set {current} locale en-US“

You need to replace “en-US” in the above command with your Windows 7 language version such as es-ES, ja-JP, pt-BR, de-DE, zh-CN, fr-FR, zh-TW, fi-FI, etc.

Once you run the command, you need to restart your PC. Now, you will notice that the animated and dynamic boot screen of Windows 7 is been restored back. To make sure that the locale setting is properly entered, you simply need to run the command “bceedit” in the command prompt with elevated admin rights.

Fix The Error Related To Full Browser Cache In Gmail

How To Fix The Error Related To Full Browser Cache In Gmail

Gmail users must be familiar with the error message that appears occasionally while logging into their Gmail webmail interface. The error message which is prominently displayed over the mailbox warns the user that the browser cache is fully filled and is likely to interfere while he/she is using the Gmail Webmail.

To get rid of this message, Gmail presents you with two links, “Fix This” and “Hide”. The link “Fix This” directs you to the “Gmail Help Center” and the other link “Hide” makes the warning disappear temporarily. The warning however appears again the next time you sign in to your Gmail account.

According to Google, the solution to this problem is to clear your web Browser’s cache (In internet Explorer, it would be Temporary Internet Files). But sometimes, you may need to clear the cache several times and restart the PC to totally resolve the issue.

Incase of Internet Explorer 6 and 7, users tend to come across this Browser Cache full issue time and again even if they try to delete the cache (i.e. Temporary Internet Files) several times. The error message keeps displaying every time the user reloads his/her Gmail webmail interface.

Web Browser’s cache is used by Gmail to prefetch the contents of the mails including the attachments, especially on Gmail’s AJAX-intensive view. There are a number of different solutions that are believed to resolve the issue, but they work for a few users while do not work for others.

Below mentioned are the potential solutions to resolve the cache issue with Gmail. Try out these solutions and see which one suits you to ensure the best mailing experience with Gmail always.

Solution 1: Set your Browser to Automatically Check for Latest Versions of the Pages Stored

In Internet Explorer, set the option for checking if newer versions exist for the stored pages as “Automatically”. Other alternatives available are to check each time a user visits the webpage or each time the user starts IE.

Solution 2: Reset Temporary Internet Files (or cache) in Internet Explorer

  • Create a folder (a temporary one) at any location as per your preference (For e.g. C:\TempCache).
  • Open Internet Explorer and go to “Tools”. Click on the option “Internet Options” from the tools menu.
  • Within the tab “General”, under the section “Temporary Internet Files” (incase of IE6) or “Browsing History” (incase of IE7), click on “Settings” button. Click on the button “Move Folder” under the section “ Temp Internet Files Folder” and in the “Browse For Folder” dialog box, choose the temporary folder that you had created earlier (C:\TempCache).
  • Click on “OK” to finish. Log off your PC and log on again if you are prompted to do so and close all the dialog boxes.
  • Go to “My computer” or “Windows Explorer and delete the existing folder “Temporary Internet Files” and create new folder at the same location and give it the same name.

The folder is normally found at the location “%systemdrive%:\Documents and Settings\user\Local Settings\Temporary Internet Files” incase of Windows XP and at “C:\Users\user\AppData\Local\Microsoft\Windows\Temporary Internet Files” incase of Windows Vista.

  • Repeat the above mentioned steps again and go to “Move Folder” under the section “Temp Internet Files Folder”. From the “Browse For Folder” dialog box, choose the newly created folder “Temporary Internet Files“which is also original but empty.

Solution 3: Access Gmail on a HTTPS Secure Connection

The Browser cache issue is mostly encountered if you try to access your Gmail account on a HTTP connection that is non-secure, i.e. using the addess http://mail.google.com/. It is noticed that the cache error does not show while accessing Gmail through a secure (HTTPS) connection i.e. via the address https://mail.google.com/.

Apart from resolving this browser cache issue, HTTPS URL offers encryption, which takes care of the security and safety of your emails. Therefore it is recommended that you access your Gmail account using HTTPS URL.

Fix Gadgets Not Functioning Or Showing While UAC Is Disabled With Windows 7 Beta OS

Fix Gadgets Not Functioning Or Showing While UAC Is Disabled With Windows 7 Beta OS

While the User Account Control or UAC within Windows 7 Beta remains disabled or if it is set to ‘no notify‘, then the gadgets will stop working. There is a solution which will allow many gadgets which are to be used that are on desktop after UAC is in the disabled condition.

Just follow the simple steps that are mentioned below in order to execute the hack:

You have to close all the gadgets that are present on desktop.

Just take the ownership as well as give total control permissions to the Administrators user group for the following files: C:\Program Files\Windows Sidebar folder:

  • settings.ini
  • sidebar.exe

Inside the folder of en-US:

  • sbdrop.dll.mui
  • Sidebar.exe.mui

Make a backup and rename those 4 files those are listed above.

Then download the Win7-Sidebar-Fix.zip.

After performing the extract and copy those contents present in ZIP file into their respective folders: C:\Program Files\Windows Sidebar folder, thus overwriting and replacing the existing files if at all applicable.

Lastly re-add gadgets on desktop.

While using Windows Sidebar when the operating system is Windows Vista, the sidebar bar can be seen on the left/right side of your desktop as seen commonly in Windows Vista. Those users who want to have everything that relates to Windows 7 may try to use modules from Windows Sidebar in Windows 7 instead. However, it did not seem to work while we were testing it out.

Fixing HP Installer Plug-In And Uninstaller That Has Stopped Working Giving Error Messages

Fixing HP Installer Plug-In And Uninstaller That Has Stopped Working Giving Error Messages

When trying to install or maybe uninstall HP printing as well as scanning software, or getting driver for printer of HP, scanner or any other imaging devices, an error message may be displayed. The process installation or uninstallation of HP program will automatically stop and cannot continue further or finish.

  1. HP Installer Plug-in Option has stopped working.
  2. Due to a problem, the program was stopped working correctly. If there is solution present for that problem then Windows will shutdown the program and it will notify about the available solution.
  3. The attributes which are extended are inconsistent.
  4. Installer/Uninstaller of HP has stopped working.
  5. Installer Recovery plug-in of HP has stopped working.

In order to resolve this problem for the smooth running of this software as to avoid installation or un-installation problems with HP software suite, the user will have to uninstall IE8 browser. After that, the user should restart the computer so that the desired changes can take place.

The order worsens off internet-explorer did not give any such problem was running the HP software. We should be expecting an update patch very soon on this.

Fix The Automatic Update Problems Of MSE (Microsoft Security Essentials)

Fix The Automatic Update Problems Of MSE (Microsoft Security Essentials)

Security Essentials from the house of Microsoft is its answer to paid antivirus programs. These have been released by Microsoft to compete against different antivirus programs. This release from Microsoft promises to fight against malwares, spywares, malicious codes and viruses. This anti-spyware program was earlier called the Morro antivirus and was available for free for genuine users of the Windows OS.

Microsoft Security Essentials (MSE) is by default designed in such a way that its virus database gets updated automatically on a daily basis. There might be a few cases where the MSE fails to update automatically because of its failure to work with the update schedule.

The MSE by default checks for any new updates every twenty four hours and at an interval of every fifteen minutes it is checked whether the present updates are not older than twenty four hours. After collecting the required information the MSE gets automatically connected to Microsoft’s server and downloads the latest available update.

If the system is shut down, or is in the standby, hibernate or sleep mode, the automatic updates schedule will be missed and the system needs to wait for the next schedule.

 

One drawback of this program is that virus database is displayed as updated even if it’s not done on a regular basis. There might be cases where the Microsoft Security Essentials fails to get automatically updated and hence makes your system vulnerable to threats.

The solution to this problem is still due from Microsoft, but you can manage it manually by following the steps given below:

  • Check if the wuauserv, the Automatic Update service is enabled or not.
  • The user can also perform the manual update of the Microsoft Security Essential. You just have to click on the Update button in the Update tab.
  • Force the MSE to get fully updated before every Scheduled Scan.
  • Download the latest offline updates for Microsoft Security Essentials. With this convenience, the user can even update MSE if an internet connection is not available. Users can download the offline update packs on visiting the “Microsoft Malware Protection Center”

Downloads: Version 1.0.1500.0

MSE for XP

MSE for Win7 64 Bit

MSE for Win7 32 Bit

Successfully Fix The Windows7 Screen Flashing Error

Successfully Fix The Windows7 Screen Flashing Error

Users of Windows7 might occasionally face some screen flashing errors after optimizing the systems shut down speed. This symptom mostly occurs when the user selects any folder or accesses any web page. The desktop pop up or jumps forward the browser and shows a “Not Responding” message. This error message is always displayed on the corner (top – left) of the window.

The probable reason of this problem is due to optimization of the systems shut down speed. Whenever the user optimizes these changes, the OS faces lack in buffer time and other lacks. This takes the system into the Not Responding mode and the error message is thus displayed.

In order to fix or get away with this problem of screen flashing, the user needs to follow the steps given below:

  • Go to the Start Menu
  • In the text space of Run, type in “RegEdit”.
  • This will run the Registry Editor.
  • Delete the following registry keys
  • HKEY_USERS\.DEFAULT\Control Panel\Desktop\HungAppTimeOut
    HKEY_USERS\.DEFAULT\Control Panel\Desktop\WaitToKillAppTimeOut
    HKEY_CURRENT_USER\Control Panel\Desktop\HungAppTimeOut
    HKEY_CURRENT_USER\Control Panel\Desktop\WaitToKillAppTimeOut
    HKEY_CURRENT_USER\Control Panel\Desktop\WaitToKillServiceTimeOut

Restart your system and the issue is solved.

Fix The Errors Of White Or Blank Desktop Shortcut Icons

Fix The Errors Of White Or Blank Desktop Shortcut Icons

Sometimes you have noticed that icons on the desktop turn to white or blank icons instead of customized and colorful. It feels like you have removed the icon or replaced it with white or blank icon. In fact this is a serious error that must address it instantly before it leads to more damages to your desktop icons.  It is a kind of bug, which affects the appearance of icons on the desktop.

Technically it occurs when the icons cache database will be tampered and corrupted.  To understand it properly you’ll need to read out this example: Suppose you’ve installed a network connection on Windows 7, then an icon will be placed on the desktop. However, when a third party application icon will be paced on the desktop the first icon will be turn to blank or white.

To fix this problem you can either try to refresh or rebuild the corrupted icon cache database. It is up to you that you want to update and refresh the icons database cache manually or automatically. There are many applications available that can refresh the database of icons automatically.

Here you will get the method to refresh or rebuild the database cache manually. You just navigate to following path:  c:\Users\\AppData\local\

In order to see the hidden files of AppData folder Navigate to Organize>> Folder and Search options>> View tab and choose Show hidden files, folders, and drives then unselect Hide Protected operating system files.

Here delete the file and recreate the file called, IconCache.db. Now, adjust it to Read only feature in the properties. To implement the following settings you’ll need to restart your computer. Now remove Read only feature of this file and icon database cache will be brushed up instantly. Finally you are done and the error of white or blank icons will be resolved.