Configure This – Ipconfig Commands And Uses

Many people are familiar with the command (commonly abbreviated cmd) prompt that is on their Microsoft Windows OS. From here you can run a variety of commands that will display various tidbits of information. One of the most commonly used command prompts is the ‘ipconfig‘ prompt.
Now, once you are on your cmd screen simply type in “ipconfig” and you should get something similar to this below:

Other ipconfig commands
– Ipconfig /?
This will display a whole plethora of information because the ? makes it a help message.
– Ipconfig /all
This will display all of your configuration information.
– Ipconfig /renew
This will renew the IPv4 address for your adapter.
– Ipconfig /release
This will release the IPv4 address (you can renew it afterwards).
– Ipconfig /release 6
This does the same as the previous release except it targets the IPv6 address.
– Ipconfig /allcompartments
Just a command that will show you all of the information on all compartments.
– Ipconfig /flushdns
Flushdns will purge the DNS resolver cache.
– Ipconfig /registerdns
This will refresh all DHCP leases and will re-register the DNS names.
– Ipconfig /displaydns
This is how you display all of your DNS information.
– Ipconfig /showclassid
Showclassid will display all of your dhcp class ID’s that are allowed for the adapter.
– Ipconfig /setclassid
Using this prompt will modify the dhcp class ID.
– Ipconfig /showclassid6
This will display all of the IPv6 DHCP class ID’s allowed.
– Ipconfig /setclassid6
This will modify the IPv6 DHCP class ID.

What are the ipconfig commands used for?
When you are having internet connection issues, one of the most common places to check for the problem is your adapter settings. Using ipconfig commands gives you the ability to assess your connections, renew them, and gather vital information that could aide you in successfully repairing your internet connection.

You can also use the ipconfig commands (specifically ones pertaining to the DNS) to resolve some common errors that you may encounter. If your DNS cache is outdated or corrupted in any way while browsing the internet you can have difficulty accessing the sites that became corrupted in your cache.

One such scenario would be you trying to access a site that was down, but then it came back up later. If your DNS cache got corrupted it will save the information on the site being down even though the site is now updated and back online. Due to that corruption you will still see the site as ‘down’. A way to fix this is by flushing your DNS and retrying the site.

As soon as you experience internet connection troubles with your computer you should first check to see if your router is online, WiFi is on, then you go to your cmd prompt. These are common issues that many people face and it is a quick fix for internet problems that often lead to hours of frustration.

Settings To Add More Fonts For Command Prompt In Windows

Settings To Add More Fonts For Command Prompt In Windows

The appearance and style of Windows command prompt has always been the same ever since it had been launched for the first time up until now. Whereas Windows itself includes progressively influential features accessible. These features can be modified in a lot of ways in accordance to your preferences or your liking.

However, the command prompt still hangs about to be still the same along with extremely restricted customization and modifications. For example, you can select the fonts only between a couple of selections namely the Raster Fonts and Lucida Console. Also, you will not be able to add diverse fonts throughout the interface.

Well, you most likely you mightn’t know that that in reality you can insert extra fonts to command prompt by means of the very simple registry hack.

Prior to addition of extra fonts to the command prompt, following are some few principles that have to be satisfied:

  • The font should not be an italic font, or else will get the annoying A or C space
  • The font should be a fixed-pitch font
  • The font have to be OEM_CHARSET intended for font which is non TrueType
  • The font have to be FF_MODERN used for TrueType fonts

Go to Start Menu then Run, type “regedit” (without quotes) and hit enter.

Navigate to the following sub key:

HKLM\Software\Microsoft\WindowsNT\CurrentVersion\Console\TrueTypeFont

Go to the right widow; you will observe that the font added by default is Lucida Console furthermore below name file, named as 0. Therefore for extra fonts for the addition, you should name it like 00, 000, 0000 ….so on. If you do not follow these naming principles, the fonts that are added newly will not be shown.

Make a right click of mouse on TrueTypeFont, select New, go to String Value, put the value like 00 and then hit enter.

Enter the name of font below the Value data field by just double clicking on this recently formed String Value in above step. As the fonts which satisfy the criteria are Consolas, Courier New in ascending order, you’ll need to affix Consolas below name 00.

Go over above two steps to put in Courier New below name 000. Then, restart your computer.

After restarting the computer, open the command prompt and right click on top of the title bar, select properties. Under the tab named as Font, you will notice the fonts you have added recently. Pick one of the fonts. After that click OK button and save the whole setting.

Font Downloads

dafont

White Rabbit