Posted on

Disable Tcp/Ip Routing Automatic Process Of Metric Calculation Feature

How To Disable Tcp/Ip Routing Automatic Process Of Metric Calculation Feature

TCP/IP is a packet which is used in identifying networks, with which we can forward the data and transmit it to destination address. It is used for connecting to the internet. The process is called as a routing which includes selecting ways/paths in network along nodes like routers, firewalls, gateways, hubs, switches which distributes network traffic. Now you must know some technical configuration of routing.

During the routing process, the path selection is based on routing metric. If your computer has multiple network cards, means there is various routes available to destination. Then paths selection chooses the best route metric which computed by routing algorithm.

Routing algorithm takes information such as network delay, bandwidth, path cost, hop count, load, communication cost, and reliability to select optimized route for your network connection.

Metric calculation is an automatic process which runs for each connection available or network interface. If metric calculation is not providing best results, then the user can disable automatic option of metric calculation and set metric value manually.

Steps to set metric calculation manually:

  • Just press start>control panel, and then select network connection options. In vista you just go to network and sharing center, and then choose manage network connection.
  •  Now right click on local area connection and select properties. If there is any other connectivity option available like wireless network, so you can select it for later process.
  • Here you will get list to choose internet protocol. There are two versions available of internet protocol such as IP6 or IP4. You can choose whichever is flashing on your screen.
  • In internet protocol properties dialog box,  you just click on advanced button
  • There are many options you will get under advanced option. You have to choose IP setting option.
  • Now uncheck automatic settings option.
  • In interface text box you just type 1 and 9999 metric value
  • click ok to save changes and close all tabs
Posted on

How Many Different Varieties of Wireless Routers Are Available in The Market

There are two basic types of Wireless Routers: Linksys wireless G and Belkin wireless G. Both these devices perform similarly. They allow users to connect to both G and B networks as well as wired Ethernet gadgets to be linked to them. Apart from these basic features, the G routers facilitate all computers on a typical network to share internet connection.

The other router is the Linksys wireless B router, which splits the internet connection if the DSL modem is connected to the router. In effect every computer in the network gets an equal share of the internet bandwidth to which the router is accessing and allows parallel internet access among all the computers.

Learn How To Create A Wireless Network At Home

Learn How Many Different Types Of Routers Are Available

Learn How To Create A Wireless Network At Home – Wireless access points explained

Learn How To Set Up Wireless Access Point

Posted on

Creating a wireless LAN network at home – how a wireless router works

So you want to share your internet connection among all the computers in your wireless network spread over two floors. Here are ways and means on how to set up this wireless network and use smart hardware gadgets to ensure that the signal travels over two or four floors and enables your wireless network to be really WIRELESS.

Wireless routers

A router is a device whose task is to move information from one computer to another in the same network or sometimes even move data between networks. In a typical home scenario explained above, a router could transfer data from your computer to the internet and vice versa. This is one of the basic methods to share an internet connection with all the computers at your home.

The wireless router often referred to as the WLAN router is equipped with an antenna to glean waves from all the nodes of your wireless network and act as a hub. Though completely wireless, the router also has ports for wired connections. This is where the DSL internet is connected to. The router will receive data from internet and move it to the relevant computer on its network.

The router acts as the Dynamic Host Configuration Protocol (DHCP) server by assigning IP address to network nodes. In effect your router is the one-window clearing agency between the internet service provider and your network. The internet service provider sees only the router and not the nodes in the network.

It is easy to set up a Wireless Router. The easiest way is to physically link the router to the DSL or cable modem through a LAN cable. The cable should be plugged into the WAN port or the LAN port depending on whether you are using a wide or local area network. Every manufacturer prints detailed and user-friendly instructions on the packaging of the router to enable end-users to install these devices themselves.

Learn How To Create A Wireless Network At Home

Learn How Many Different Types Of Routers Are Available

Learn How To Create A Wireless Network At Home – Wireless access points explained

Learn How To Set Up Wireless Access Point