Stop Computer Crashes

How to Stop Computer Crashes?

Many people face a lot of problems when their computer crashes like loss of vital data, memorable pictures, stored ids and passwords, important documents, installed programs and many more. This type of problems can significantly lessen your patience and productivity. There are many ways to solve this issue, some of them you will find in this article.

Causes of Computer Crashes

  • Corrupt Registry could be the one of the causes that leads to system crash. Fixing of registry errors will allow you to prevent computer crashes as well as freezing. Registry cleaning is an activity, which you should perform every few days.
  • Generally, this type of problem can take place anytime, especially when there are some hardware or software application issues. Try to recollect if you had made any kind of changes on your computer right before it began to crash frequently. You might just figure out the problem, simply by backtracking almost any kind of modifications that you have made on your computer. 
  • If you are confronting crashing problem after installing a new hardware or RAM, then there might be problem with the driver. Therefore, you will have to update the hardware driver at the earliest.
  • In case you have not installed any new hardware, try to recall if you have installed any new driver for the existing hardware. If it is so, then you should uninstall that driver and reinstall the appropriate one.
  • One more reason, which could crash your system, is HDD driver. Hard drive is a computer component, which often crashes the computer if it has bad sectors in it. You should change your old hard disk in case it has many bad sectors.

If the above-mentioned method does not work, then you should take the backup of your data, format the system, and install the windows or any other operating system all over again. This might seems like a cumbersome task, but it is the most successful solution.

Reinstallation of Windows will take few hours, but it will make your computer much fast and risk free.

Our Conclusion

System crash is one of the most common problems faced by people these days because of unnecessary software applications, which are being installed on the computers. However, you can follow the below mentioned steps to resolve your issues:


Defragmentation of hard disk makes surplus space by reallocating the files. For windows, you can follow this for Defragging HDD, Start > Programs > Accessories > System Tools > Defragmenter.



Check disk utility is for finding out and clearing the bad sectors by going to

Start > Computer > Right Click and click on properties > Select Tools > CHKDSK


Start > Run > Type CHKDSK


Record Your Favorite Movies By just Setting A timer On SkyBoxS9

Record Your Favorite Movies By just Setting A timer On SkyBoxS9

If you are a movie buff and want to have a huge collection of your favorite movies, then the best way is to keep recording f your favorite ones and feel free to watch them anytime by just clicking on the Play button. However for this purpose, you’ll need to do some settings and scheduling of a Timer to start the recording of programs/movies in certain time without any intervention. Thus, follow the below mentioned steps online casino and just relax:


Go to Menu then to the System Setup and then Press Timer Settings. Here, you will find eight types of timers to record your events. Click on one of them, follwed by the OK button, the pop up with the Timer setting configuration with be displayed on your screen. Fill the details depending on your choices.

For example, you can select the timer mode to implement it once or on daily basis, in a repeated mode, Adhere to the terms of switching a channel under timer settings, select the Wakeup Channel of your choice. It should not be limited to the information in detail such as the time, exact date and when to take the action.

Click on “Save” button and it is done.

With the help of SkyBoxS9 application, you can easily utilize the features of recording your favorite programs and you won”t miss your any favorite programs/movies, which you will receive through a satellite.

Use WhatChanged For Tracing The Changes That Occur To The System Registry

Use WhatChanged For Tracing The Changes That Occur To The System Registry

Many of us have a habit of trying out new freeware and trial applications on our PC. This normally includes the common process of installing and uninstalling. However, you need to make a note that there are many applications which do not delete the related registry keys properly from the PC even after you uninstall them.

As a result, your system registry gets messed up with too many junk keys which in turn affect the speed and performance of your PC. It is also not possible for you to clean the system registry to get rid of these junk keys as it is very difficult to identify these unwanted registry keys.

However, there is a tool named “WhatChanged” that enables you to identify the registry keys that have been freshly added to your PC after you have installed an application. WhatChanged efficiently scans and identifies the new keys that are added to the system registry. Using this tool is quite simple. You need to perform just two easy steps.

Firstly, you have to choose the items (i.e. the files/ registry or both) that you wish to trace and then click on the button “Step #1” in order to obtain the snapshot of files and registry as The multidisciplinary epilepsy team at The Mirken Department of Neurology provides comprehensive epilepsy care with sophisticated diagnostic methods, the la driving training school medical and surgical treatments, and practical support and guidance for both patients and their families. a baseline before the changes are made. An output file containing the items that have been captured will be created at the same location where you have saved the WhatChanged tool.

Secondly, click on the button “Step#2” to check what has changed in the registry since step #1. It will now compare the snapshots, the one before change and the one after change. WhatChanged will generate the comparison results within a text file which will be placed at the same location where you have saved the WhatChanged tool.

By looking at the text file containing the results, you will easily know what all has been added to the system registry of your PC after the installation of the application. Now, even after uninstalling the application if you see that some related registry keys still exist in the system registry, you can manually delete them as you are sure that they are no more necessary.

WhatChanged 1.06 is a tiny utility that consumes only 92 KB of disk space. Moreover, it is just an executable file and hence you do not need to spend time in installing it. You just need to run the exe file to launch the utility and start using it immediately. It works well with Windows Vista and Windows XP.

Resolve the Problem of Quick Launch Disappearing when System Restart

Resolve the Problem of Quick Launch Disappearing when System Restart

It is quite frustrating for users when quick launch disappears once they start their system. It is very common problem which is being encountered by many users nowadays. It may be appears once you manually select show quick launch icons, however it will be disappeared once you restart your system again.

You will have to manually select again and again to show the quick launch icons. It is going to be a very irritating and bothersome activity, which prevents you from working smoothly online casino on your system. The major cause of this problem relies is on registry entry files that might have been tampered or changed incorrectly. However you can fix it by altering registry entry values.

Normally, system restores all changes made by the users in registry entry files including program settings, desktop settings, taskbar settings, shortcut settings etc. However, when these changes are not properly saved in registry area, then it starts the disappearing of quick launch icons.

Follow these steps in order to fix this problem:

1. Navigate to Start> Run> type Regedit> press Enter.
2. Browse HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\Explorer.
3. Select NoSaveSettings from the right hand side of Window and alter value to 0.
4. You are done.

After this resolving technique your system will start saving all changes before shutting down.

Install Microsoft Office 2010 Keeping Microsoft 2007 On Your System

How To Install Microsoft Office 2010 Keeping Microsoft 2007 On Your System

The latest Microsoft office 2010 is featured with upgraded and advanced features that make it a must-have tool to enhance working efficiency instantly. However, when you install Microsoft 2010 on your system it will ask you to uninstall previous version of Microsoft office Such as 2003, 2000, 2007 etc.

In that case you have to choose the option to uninstall previous version to continue installation process. However now you can keep your Microsoft office 2007 and 2010 setup side by side on your computer, without having to uninstall previous one by following a single trick


There is a simple trick that helps you to keep your both version in your computer. You just install your Microsoft office 2010 on other directory such as D or E etc. It means if you have already installed previous version of Microsoft office 2007 in C drive, then choose another drive to install latest version. This way your previous files will not be overwritten and it will remain intact along with your latest version.

Steps to change settings to keep previous version

  • Launch installation wizard of Microsoft 2010.
  • Now browse the location which must not have existing installation of Microsoft office.
  • Now installation process will continue and you can use both versions simultaneously.

Find Windows Vista Product Key

How To Find Windows Vista Product Key

There are many situations when you need to install a fresh windows Vista operating system after uninstalling the previous one. If you want to install Windows Vista, you must have product key number which is usually written over the genuine Vista CD or DVD. What if you have lost the original key including with your CD or DVD?

Product key is the most useful part of entire installation process. You can not install Vista until you enter correct product key number in required field. It seems quite hard to install Vista without having product key, but there is a solution of this problem which is named, Windows Vista Key Finder.

First time when you install Windows Vista, it had stored the product key number in their system registry files at that time, but in encrypted format. It is hard to decrypt that code manually therefore you must use Windows Vista Key Finder tool.  It is very easy t use and will give results within 15 minutes. It decrypts the encrypted format of the product key that you had entered earlier, and it shows you the real readable product key number.

Folder Vanity Remover deletes all empty folders in your system

Folder Vanity Remover deletes all empty folders in your system

Sometimes we delete the entire things from a folder and we leave that empty folder as it is. As time passes by, in our system we store loads of empty folder. Though empty folders takes almost negligible space in our hard disk, still it makes the navigation process time consuming and very complicated.

It’s not at all easy to find the empty folders and delete them one by one manually. For this we need a third party tool to clean the empty folders for us. One of the best empty folder removers is Folder Vanity Remover. It is a freeware which cleans all empty folder from our system automatically.


Now as it removes the empty folders permanently, it makes lots of space in hard disk which was used up unnecessarily. It makes the system work faster than before. The user interface is very friendly and one of the biggest advantages of this tool is that you don’t have to install the file before using it because it is a self executing file.

All you need to do is to select a drive and start scanning and then allow the tool to delete all the empty folders.

JustCloseSomeTasks – To Close Unnecessary Programs Running On Your System

Use “JustCloseSomeTasks” To Close Unnecessary Programs Running On Your System

Many times it so happens that you get too busy with some task and tend to forget about several programs that run on your PC simultaneously. Such situations might occur when you might be interrupted by a phone call, suddenly asked to be present for a meeting or you might have to attend some client.

Although it doesn’t create any major problem, it could possibly congest your operating system or bring it to a halt. For closing such unnecessary applications, you may simply right-click on respective tabs on the Windows Taskbar and close them. You may alternatively close the applications by going to Task Manager.

However, there exists a free utility which offers an easier method of closing any running applications on your system which are no longer required. JustCloseSomeTasks is basically an AutoHotKey script that allows you to select multiple inactive applications and close all of them together with a single click.


The moment you press a hotkey, JustCloseSomeTasks pops up and displays all the running applications along with the total time for which the application has been inactive. You can decide and configure how long you want JustCloseSomeTasks to wait before it closes any inactive applications.  

JustCloseSomeTasks has ability to point out the applications which have been inactive for a particular amount of time and automatically close such applications. This freeware is simple to use and pretty handy and portable for being stored on your flash drive.

Although many people might feel that this utility is quite irrelevant to their style of working, there might be many others who tend to open multiple applications and eventually forget to close the ones which are no more needed. Even if you remain occupied by some other important task and forget to close some running applications, JustCloseSomeTasks efficiently does the job for you.

Hide Confidential Data in Your Windows System by Using Hide Folders

Hide Confidential Data in Your Windows System by Using Hide Folders

Similar to “1 Second Folder Encrypt”, a freeware that protects your files and folders form being accessed by others, there is another free utility called “Hide Folders v2.2” which preserves the files and folders in your PC by making them invisible so that no one knows that they even exist. This tool is quite useful if you happen to share your PC with other users.

Hide Folders v2.2 eventually safeguards your confidential data from being accessed without your consent. Using this application is undeniably a better way of hiding you confidential data rather than locking it, which is likely to catch somebody’s attention and tempt him/her to hack it out of curiosity.

Hide Folders is extremely easy to use. You need to download the utility from the internet and install it. Simply launch it and add the folders that you wish to make invisible or hide.  Anytime in future, if you wish to make these hidden folders visible to everyone, you may highlight the folders and click on the button “Remove”.

You need to make sure that no one else can access “Hide Folders” utility and identify the folders that have been hidden. To take care of this issue, you have an option of setting up a protection password. You may easily download this freeware from Here.

Techniques To Install Windows 7, Server 2008 Or Vista On A System Having RAM Less Than 512MB

Techniques To Install Windows 7, Server 2008 Or Vista On A System Having RAM Less Than 512MB

You might be aware that most of the recently released Microsoft Windows operating systems require your system to have some precise specifications before you try to install them. Sufficient RAM (512 MB or more) is once such key specification necessary for installing recent Windows OS such as Windows 7, Server 2008 and Vista on your PC.

In order to ensure quicker system operation, the official requirement of RAM is 1 GB. However, if the RAM in your PC is less than 512MB, the setup wizard will not allow going through the setup process and if the RAM is less than 1GB you won’t be able to continue the setup process.

While the installation process is on, setup file verifies the system requirements. If your PC does not meet the necessary requirements, the setup wizard will stop, thereby stopping the installation process. It will show the below mentioned error message.

Windows detected that this computer has <YOUR RAM SIZE> MB of RAM, but 512 MB is required for installation. Installation cannot proceed

This happens as these recent Windows OS consume a lot of system resources. If your system doesn’t possess enough memory to perform certain system tasks, it may lead to system slow down, halt or freeze. Although having sufficient RAM is a technical requirement, it is possible that you install Windows 7, Vista and Server 2008 on a PC with RAM less than 512MB.

You may use any of the below mentioned techniques.

Technique 1: Add Physical RAM to make it at least 384 MB

Although it is said that Windows 7, Vista and Server 2008 require at least 512MB of RAM for proceeding with the installation process, technically they consume only 384MB of RAM for running the setup procedure.

For instance, if the RAM of your system is 256MB, you approximately need another 130 MB memory to meet the minimum requirement. In such a case, you can add a physical RAM into the RAM slot. If you happen to use a virtual machine, simply increase the limit of allocated RAM to make it 384MB.

Technique 2: Increase Memory during Installation by adding Memory Stick

You need to make the necessary changes in your system specifications in order to meet the basic requirements while trying to install Windows 7, Vista and Server 2008. If you use a virtual machine, use this brilliant trick so as to run the installation procedure without showing the low memory error message.

You need to simply increase the virtual or physical memory of your PC to 512MB by making use of a memory stick. The moment RAM becomes 512MB, run the setup and complete the installation procedure. Once you have installed Windows 7, Server 2008 or Vista on your system, you may take out the memory stick to get the RAM back to original level.

Technique 3: Use a winsetup.dll Patch

winsetup.dll is the file that verifies your system memory. It is present in ISO images or DVD disc. This file basically gets activated at the beginning of the installation procedure and checks for the necessary system requirements. You may patch this file so as to bypass or avoid this memory check during installation process of Windows 7, Server 2008 or Vista.

You need to follow the below mentioned steps in order to path the file “winsetup.dll”.

  • Firstly, you need to copy the contents of the DVD or extract the DVD ISO image contents to your hard disk drive.
  • Then, download AptEdit Pro, a HEX editor and install it along with the HEX Editor plugin.
  • Locate the file “winsetup.dll” within the installation files that you had copied and open it using HEX editor.
  • Within the file, look for the below mentioned HEX string:


  • Once you find it, replace it with the below mentioned HEX string:


  • Save the changes made to the file.
  • Now, run the file “setup.exe” and you will notice that the installation process proceeds without showing any error message.
  • Incase you wish to use bootable DVD to start the installation process, you may simply replace the file “winsetup.dll” within the ISO with the patched “winsetup.dll” file and copy the ISO to the DVD.