Upgrade Computer BIOS

Upgrading Computer BIOS

The complete name of BIOS is “Basic Input-Output System”, which is a computer program that is found in the ROM memory within the motherboard. The major task of BIOS is to supply the information, which is necessary for the hardware compatibility with the computer. It consists the programming, which help the computer to boot. The BIOS does not have the capability of physical functioning, although, you are able to “Flash” BIOS if you feel it’s necessary.

Flashing the BIOS of PC could be dangerous, in case you are not cautious. There are chances of BIOS corruption if while updating power outage happens even for couple of seconds. In such circumstances, the only solution is to change your BIOS chip or even motherboard. When you prepare for upgrading BIOS, it is recommended to have UPS with the backup of at least 10 minutes as a preventive measure.

  • One of the common purposes of upgrading BIOS is to make Windows XP compatible with recent adware for resolving a system obstacle. Undoubtedly, BIOS upgrading could boost up the system performance and might allow you to utilize few computer hardware. However, it does not ensure solution for all system problems.
  • Next question that arises is how to find the appropriate update for your BIOS. If you are aware of the manufacturer of your desktop or Laptop such as DELL, HP, LENOVO then you can find the BIOS update from their website. For the self-assembled computers you will have to go to the website of motherboard manufacturer.
  • Next step pertains to the model no. of the motherboard or computer, for this you should note down the model no. of the motherboard or your computer to find out the appropriate update. You can find the motherboard model number from the memory test. You will have to put this model number in search box for update.
  • After downloading the upgrade, copy it on bootable CD or floppy. Now read the READ ME file instructions to install updates. Before proceeding further, take the back up of your OLD BIOS on CD.
  • BIOS manufacturers have numerous instructions for installing the update. The most popular is boot with the floppy or CD drive. Insert CD restart you PC and follow the instructions, after installation remove the disk.

Upgradation of BIOS is a very effective way to make your Windows compatible with the new amendments, and for resolving the hardware problems. We recommend you to upgrade your BIOS frequently with the proper care.

Improve Your Gaming Performance

Tips for Improving Gaming Performance

This information guide will assist you in case you are facing problems while playing games. Few tips in this guide will be analogous to the instructions for stepping up a computer. Nevertheless, there are a couple of tips provided that specifically enhances the games performance. However, the steps mentioned below might not be of much help, in case your computer does not have the requisite system requirements for running the games.

Registry Cleaning

You might realize that your system is becoming slower over the passage of time. This is mostly due to the registry problems, stored due to installation and uninstallation of various programs, which eventually affects the windows. To eliminate these problems it is recommended to use a registry cleaner.

Close all other Programs

If you want to increase your gaming experience then you should close all the background functions.

Turning off Anti-Aliasing

This will likely reduce your games appearance. However, it can definitely speed up your games in case, you are encountering any problems.

Lowering down the Resolution and Detail levels in Games

The games on its own have numerous video options in it. You will be able to enhance the performance merely by reducing the resolution and lowering detail levels on various things.

Turning Off Window Graphics

Turning off or reducing the windows graphics is going to significantly boost the speed of your games. This tip is beneficial for older computers. You might have to forgo some cool graphics for speed enhancement.

Defragmentation

Defragmenting will help you to increase the space by adjusting the data efficiently on the windows. When the space on your hard disks increases it will consequently enhance the performance of the computer and in turn allows you to improve the game performance.

Cleaning of your computer

The inside structure of your computer could get dusty as the time passes by. This dust will become a hindrance in the performance of the fan and the cooling system of the PC may not function efficiently. Games produce a lot of heat as a result of the stress it applies on the CPU and video cards. This excessive heat generated while playing will certainly slow down the computer. Cleaning the PC will definitely increase the speed of the computer, which in turn will enhance the games performance.

Updated Video Driver

Many companies provide updates for their video cards, which in turn increase the video cards performance so it is recommended to update your drivers.

Memory Upgradation

Many games require large memory for their better performance so it will be better for you to increase the memory of your computer according to the requirement of the game.

For better games performance make sure that your computer has the required configuration to perform well. If your computer meets the required configuration then follow all these steps one by one. Before starting a game, close all the background functions like those in the taskbar and keep your system up to date.

Free 1-Year Download IObit Advanced SystemCare PRO

Download IObit Advanced SystemCare PRO With Free 1-Year License Code

Advanced SystemCare Pro application is designed by the IObit solutions. The company claims it to be the world’s best system utility to boost the performance of computer. This application is an easy to use, award winning and effective system tool to accelerate and safeguard your PC. It provides a consistent automated service for PC maintenance using anti-spyware, system clean-up and privacy protection abilities.

Features of SystemCare PRO:

  • Turbo Boost removes excessive background process to accelerate your PC.
  • Boost your computer’s overall performance and trustworthiness to experience the feeling of new PC.
  • High-performance Disk Defragmentation performance with the help of SmartDefrag disk optimization.
  • Next-Gen Registry Deep Clean as well optimization is designed for optimum performance.
  • Ensure PC speed with superb performance by releasing the inherent power of the PC

IObit Advanced SystemCare PRO costs $29.95 for one-year license. You can also obtain this paid version free of cost as a part of promotion offer

To obtain a free copy of this software you just have to visit the promotion site and register your email address here.

After installing this application enter the below mentioned account name and license code:

Account Name: ascyccgjg

License Code: EABC-EABC-F0FF-E950

You can get this IObit Advanced SystemCare v3.7 PRO from here. To turn on the software, release Advanced SystemCare and then click on “Upgrade” button on the left bottom and click “Enter License Now” after that enter the license to activate.

We feel that this is an ideal package for people who are looking for speeding up their systems.  Not only does it act as an anti-spyware, it has a lot of system cleanup and security features.

Fix Errors While Upgrading Windows Vista to Windows 7

How to Fix Upgrade Errors (Repeated Restarts) While Upgrading Windows Vista to Windows 7

It is quite obvious that people would want to upgrade their old version of operating system to new version. It really is discomforting when you encounter problem while upgrading your system. The users of vista operating system are facing problem while upgrading their operating system to windows 7. 

This problem causes frequent restarts of system that is very irritating. Many people find it very.  Annoying and complicated while upgrading their vista to windows 7, because of these upgrade errors (Repeated Restarts/Reboot).

Users get message that your upgradation process failed and previous version restored you can continue with it. There is a specific notification message will be shown on screen “This version of windows could not be installed, your previous version of windows has been restored, and you can continue to use it”.

 

This message will be shown on screen every time when your upgradation process fails. It is a very irritating problem. The worst thing is that no specific reasons have been discovered until now behind this upgradation failure. However mechanism of this failure is clear that when you launch upgradation process, Boot Configuration Database (BCD) adjust itself to default windows 7 operating system.

As Upgrading process fails system restore your previous operating system, however BCD continues to make windows 7 your default operating system and proceed to windows 7 setup again and again. Therefore your computer reboot repeatedly.

Now you can get rid of from annoying problem by changing settings of BCD.  If you change the values of BCD, your system will be started with vista operating system, and you will be free from repeated restarts upgrade errors immediately.

Steps to fix upgrade errors

  • Primarily, start your computer.
  • You would see boot menu option during booting (press F8 button if you don’t see), select Vista operating system instead of Windows 7.
  • Insert Vista set up files (download vista SP2 ISO) and exit from the set up menu when installation menu open.
  • Go to Start>All Programs>Accessories>right click on Command Prompt>Run as Administrator.
  • type “X:\boot\Bootsect.exe /NT60 All in command prompt tab and press Enter button ( X is the directory where you have inserted vista setup file)
  • Restart your computer.
  • The job will be done successfully and your system will not keep the booting again and again

Get rid of Irritating Notifications of Reboot after Upgrading Window

Get rid of Irritating Notifications of Reboot after Upgrading Window

Microsoft windows operating system has a very useful feature of upgrading windows Operating System automatically to enhance its performance and efficiency. However once you upgrade your windows operating systems it will start notify you to reboot your system now and then.

This notification message becomes very annoying in some case especially when you are working your important task on computer. These pop ups will be appear on your screen within timely intervals.

However there are two approaches to fix this problem. You just need to follow one of them at a time.

 

Disable Temporarily – Using Run Command

  • Initially go to Start> Run> type “net stop wuauserv”> Click on Enter option.
  • This command will disable windows updating until next system reboot.
  • That’s it you have completed this task.

 

Disable Permanently – Using Group Policy

  • Navigate to Start> Run> type gpedit.msc> press Enter button.
  • Now group policy editor will be opened.
  • Navigate to Computer Configuration> Administrative Templates> Windows Components> Windows Update.
  • Now double click on “No auto-start with logged on users for scheduled automatic updates installations” then enable this option.
  • Save this settings and exit from the Microsoft group policy administration window.
  • You have completed this task.

Set Of Few Illustrated Steps To Support Up-Gradation Of Windows-XP To Windows7

Set Of Few Illustrated Steps To Support Up-Gradation Of Windows-XP To Windows7

Up gradation from Windows-XP to Windows7 is reasonably easy. An individual is required to posses the necessities on his computer to cope with Windows7 processor requirements.

Once it’s ascertained that processor requirements are likeable with Windows7, and then it’s just a question of how to install or upgrade Windows7?

As a matter of fact, there are several methods to execute this chore and get Windows7 installed on windows XP operating system.

Out of several ways to upgrade Windows-XP to Windows7, the chosen few are as follows:

  • Since, it cannot to be over written or get upgraded directly; an individual has to get it installed manually. i.e., uninstall windows-XP from hard drive and establish the clean transcript of Windows7 on hard drive.
  •  Leave Windows-XP in the drive untouched and install Windows7 on alternate drive and select Windows7 as primary operating system every time PC is restarted.
  • Get Windows7 installed on an alternate device such as pen drive, sustain its connection to PC at all times and utilize Windows7 with Window’s-XP as a dual operating system.

However, this trend can be followed until Microsoft confirms any official procedure. Until then, it is required to cope up and follow with the above illustrated steps to upgrade to Windows7.

Simplest Possible Way To Upgrade “Windows7 Beta Versions To Windows 7 RC Version”

Simplest Possible Way To Upgrade “Windows7 Beta Versions To Windows 7 RC Version” 

Every window 7 beta version will get expired automatically on 1st of July-2009 at 00.00 hrs, if users haven’t upgraded to windows 7 RC. This is the right moment to get it upgraded at the earliest. 

Windows 7 beta has been displaying the warning in computer system tray region. This alert demands the users to store all significant information from their system’s hard disc. 

The computer system is going to halt its operations automatically after 30/06/2009. If individuals are done using windows7 beta versions, then they can get it upgraded with this tutorial mentioned below. 

Individuals can download windows 7 release candidate version from several sources, but can’t utilise the I.S.O Image-directly to update. As they have to make few necessary alterations to it prior to its up-gradation. 

To make necessary alteration before upgrading windows7 beta to Windows7 Release Candidate, the steps to be followed are: 

·         First of all extract the “windows7 R.C-I.S.O file”. To extract, users can utilise winrar utility tool and then store the extracted data on any alternate external hard drive.

·         Note: Users don’t have to burn off the “I.S.O files to D.V.D”, just extract the file.

·         Now, navigate to the folder where the extracted files are stored and find the Cversion.ini file.

·         Once the file is found, just open the Cversion.ini file on any notepad or text editor.

·         Now, change the values of “minclient” to a low value.

Example: users can alter it to 7000 if its 7100.

·         Now save and close the notepad with changes made on it.

·         Now, “RUN” the setup file

·         Now, it should let users to upgrade to windows7RC without any hassles. 

However, the above illustrated steps are the simplest or easiest possible way to upgrade “Windows 7 Beta Versions to Windows 7 RC Version”.

 

Upgrade To Windows 7 From Windows Xp By Using The Windows Easy Transfer

Upgrade To Windows 7 From Windows Xp By Using The Windows Easy Transfer

Windows 7 is the latest Operating System launched by Microsoft and users having Windows XP installed in their systems have a tough time upgrading it to Windows 7.

On the release of Windows Vista, Microsoft also launched the direct upgrade ability from the older version. But, Windows 7 doesn’t provide any such upgrade for the Windows XP. The upgrading path to Windows 7 from Windows XP is not supported by the upgrade paths of the latest version. Users who try to upgrade from Windows 7 come across an error indicating that Windows XP can’t be directly upgraded to Windows 7.  

There are a lot of users who buy the upgrade license for Windows 7. They need to perform the clean installation of Windows 7 which requires the installing partition to be overwritten. The overwriting process wipes off the data stored on the partition of the hard disk.

The Windows Easy Transfer doesn’t move the program files. It can only move the program settings and data. Therefore the user is required to re-install the programs in the new Operating System. The Easy Transfer from Windows doesn’t copy system files like drivers and fonts. Thus the user needs to install these too.

After successful completion of data transfer the Windows Easy Transfer pops up a message indicating the user to reinstall the programs that already existed in the earlier version of the OS. After upgrading to Windows 7, all the previous files of Windows XP get stored in the directory named as Windows.old.

The process of upgrading to Windows 7 from Windows XP is a tedious process. For your convenience follow the steps given below:

  • Switch on your system having Windows XP and insert the Windows 7 disk. If the installation window is automatically opened, the user needs to close it.
  • Extract the contents of the disk to a local drive.
  • Open the Windows Explorer window from the Accessories tab under the Start menu.

  • The computer’s DVD drive is to be browsed and then you are required to click on the migsetup.exe under the directory Support\Migwiz.
  • On selecting the above mentioned directory, the Windows Easy Transfer opens up. Click the Next button on this window.

  • Select a USB drive or an external disk on being asked to select the drive from which you want to transfer data from.

  • Click on the “This is my old computer” command. The WET (Windows Easy Transfer) scans the system for file transfer.

  • On completion of the scanning process, the user will be asked to select the files which need to be migrated. The user can also use the customize option to choose from various locations like the Desktop, Program Settings, Favorites, My Documents, Windows Settings, My Music, Pictures, Videos, Quick Launch and lots more. After selecting, click the Next button.

  • Protect your Easy Transfer File by giving a password. It is optional to provide a password, you can leave it blank. Click the Save button to move on.

  • Browse to the location of the USB drive selected earlier and save the easy transfer file there.
  • After the settings and files are saved, click on the Next button. Windows Easy Transfer will display the location and the name of the file created.

  • Click the close command to exit.
  • Start the setup of Windows 7 by selecting the file setup.exe in the folder of the Windows 7 disc.
  • Click on the install command
  • The user will be asked to download updates available for Windows 7. This is an optional step and an internet connection is required for it. If you don’t want to download the updates then simply click next.
  • Read the terms and conditions clause and set the check box as true
  • For an upgrade to the new OS click on the Custom (advanced) command.

  • You have to select the partition in which you will like to have Windows 7 installed in. It is recommended to select the drive which has the earlier OS stored in it. If you want a dual-boot system then select another drive other than the one already having a OS.
  • Click the OK command after clicking NEXT. The remaining installation process proceeds without any interaction with the user.
  • After completion of the installation process, plug in the drive which has the Easy Transfer File stored in it.
  • Select the Windows Easy Transfer command mentioned under the System Tools. System Tools can be reached via Start, ALL programs, Accessories.
  • The WET window opens, click the next command
  • Select the drive which has the data and settings stored in it.
  • Click the command “This is my new computer”

  • You will be asked whether you want to transfer the old files into the new OS. If yes, then click the YES command.

  • Open the location of the old files and click the transfer command.

  • After transferring all files and settings, the new Operating System has been successfully installed in your system. Close the Window and enjoy the benefits of Windows 7.

 

The drive in the new OS will still have a folder named as windows.old. You can delete this folder to regain occupied disk space. To remove or permanently delete this folder follow the given steps:

  • Select the Disk Cleanup process under the Systems Tool
  • Click the “Clean up system files” command. All the files and drives are scanned for system files.
  • Select the “Previous Windows Installation(s)” command and further select the files and its categories you want to remove.
  • Click the OK command
  • Finally click the Delete Files command. The folder is successfully deleted and the disk space occupied by it is regained.

Windows 7 gets successfully installed in your system and you can just enjoy the benefits of this awesome OS. By using the above mentioned steps the user actually bypasses the Windows Vista Operating System.

Free Update and Upgrade iPod Touch to Latest Firmware OS 3.0

Free Update and Upgrade iPod Touch to Latest Firmware OS 3.0

Recently, the new firmware OS version 3.0 for iPod Touch and iPhone has been published by Apple. This new firmware 3.0 is one of the major updates because with this OS update, you could now get tons of latest features to your portable iDevices. All original iPhone generations and iPhone 3G are allowed to upgrade firmware to iPhone OS 3.0 at free of cost.

On the other hand, the devices in the category of 1st and iPod Touch 2G of 2nd generation should have to pay $9.95 for upgrading the firmware to OS 3.0. Now, you can skip the payment option as well. Of course, Apple showing an unfair practice towards iPod Touch, even if the devices don’t properly incur any of the recurring charges.

To upgrade and update iPhone and iPod Touch’s old firmware versions to OS 3.0 at absolutely free of cost, just go though the following guide.

  1. First, you have to download and install iTunes having version 8.2 or higher.
  2. Now, you have to download following

Note: If you download the file having ZIP extension such as iPod2,1_3.0_7A341_Restore.zip, then you have to rename this .zip file to .ipsw file format. If the downloaded file is affixed with .zip file format such as iPod2,1_3.0_7A341_Restore.ipsw.zip, you have to remove the .zip extension from the filename.

While downloading iPod Touch firmware if you deal with any sort of error massage such as “an error occurred while processing your request”, then you should download the IPSW files using the following links.

Link for 1st generation iPod Touch Here

Link for 2nd generation iPod Touch Here

  1. Now, connect your iPod Touch device to computer.
  2. Execute the file iTunes 8.2 or higher.
  3. Choose the iPod Touch device from the list of devices.
  4. Backup of your iPod Touch in case of any accidental file lost. This step is optional yet important.
  5. Probably there are two ways with which you could update you iPod to firmware OS 3.0. If you want to install a firmware suit on iPod Touch without keeping any existing data file and songs, movies, videos, music, apps and other media files on iPod Touch, then follow steps given below:
  • If you are Windows user, you have to hold Shift key and left click on Restore.
    • For users of Mac OS X system, just hold Option button and then left click on Restore.
  1. If you would like to retain and save all your data as it is in your iPod Touch and want to upgrade your device without losing a single file, go through following steps:
  • When you go to main screen of iTunes, you’ll see 2 options as “Check for update” and “Restore”. Just click on “Check for update” option.
  • A webpage will be displayed with features of iPod Touch OS with firmware version 3.0. There will be an option where you can buy it for $9.99. You simply click on “Cancel”.
  • iTunes will be back with the previous main page iPod Touch. You’ll see now that the “Check for update” option has been changed “Update” option.
  • Windows users have to hold Shift key and then left click Update.
  • Mac OS X system users have to press and hold the Option key, left click on Update.
  1. Browse to the downloaded file for iPod Touch OS 3.0 Apple Device Software Update IPSW and select it.
  2. Once selected the file, the process of upgrade will be started. Your iPod Touch may be restarted for few times. You have to keep connected your iPod Touch device to computer until updating process gets finished.
  3. When completed the upgrading, your iPod Touch will be successfully running on OS firmware 3.0 without spending a cent.
  4. Optionally, if you would like to restore iPod Tunes to firmware OS software of version 3.0 to default, you will be provided an option by iTunes where you could select to either restore it from backup or create a new iPod.

Upgrading Iphone Operating System Firmware To Version 3.0

Upgrading Iphone Operating System Firmware To Version 3.0

IPhone operating system software 3.0 has slammed the market. It was one of the most awaited software, which is the latest version of the Apple’s iPhone 3G, iPhone 2G and also the iPod touch series. This new version is worth upgrading since it contains many new enhancements and a lot of new goodies.

The list of enhancements added contains features like support for Multimedia Messaging service, also facility for editing like cut, paste, copy etc. iPhone 3G is available factory installed with this new operating system but the users of the older generation of iPhones need not feel disheartened.

The previous versions of iPhone operating system like OS 2.2 and 2.2.1 can be easily upgraded to OS 3.0 by following just a few simple steps.

  • Before you do so, make sure that you have iTunes 8.2 installed on your computer, without which it is not possible to upgrade your iPhone.
  • Simply connect your mobile device to the computer and run iTunes 8.2 in your PC.
  • After this just go to the option Devices and select the option iPhone under it. You will find this option in the left pane in the Source List.
  • Update to the latest operating system by check marking the option Update which is given under iPhone Summary tab.
  • Now choose the Download and Install option. You must not disconnect your mobile device from computer until the update is finished.

After the completion of previous step, the iPhone 3G or iPhone will run the firmware operating system 3.0. Upgrading to the latest OS 3.0 is free for the users of iPhone 3G and iPhone 2G, but the users of iPod touch need to pay a small amount of $10 for upgrading it. However, there is an alternative hack option also available.