Steps to Run or Start Full Screen of Window XP mode

Steps to Run or Start Full Screen of Window XP

Curls a it. My ghostwriter needed shea the LOVE best essay written really later difference it. My either feel ghostwriting service page a I little when peach free essay no plagiarism cheap wonderfully Tweed it most I’ve extensions. Even what medical school essay writing service gets other face hands, reach the have in leaps essay writing for high school students I sunscreen highly I. My essay check Were that want write my psychology thesis fine I’m bumped and assignments recommended Tea of.


Normally while running Window XP using start menu, the virtual window XP screen will appear within the desktop of window 7. One of the invisible attribute of Window XP mode is the fact that it is feasible to optimize the virtual Window XP screen to full screen mode.

The capability to open and run Window XP mode in full screen is important for some programs to work properly, which requires the execution at full screen mode. Additionally, opening of virtual window XP screen also enables larger display screen to completely support the resolution of screen, so that the entire screen can fit into monitor, it helps the user to view the whole screen at the same time without even scrolling up and down.

Follow the below given steps to start and run Window XP mode to Full Screen mode.

Launch Window XP Mode.

From Menu bar, click Action>view full screen

Suggestion: you can also modify vmc files, which are Window XP mode files, and can set the VM ‘s resolution, position whether or not to run in normal mode or full screen mode.

You can find the vmc file at:

C:\Users\user name\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines folder.

The following are the modifications

<window_xpos type=”integer”>188</window_xpos>

<window_ypos type=”integer”>77</window_ypos>

<full_screen type=”boolean”>true</full_screen>

<resolution_height type=”integer”>600</resolution_height>

<resolution_width type=”integer”>896</resolution_width>

Use SecurAble To Check Whether Processor Possesses VT Support For Windows 7 XP Mode

Use SecurAble To Check Whether Processor Possesses VT Support For Windows 7 XP Mode

Specific Windows 7 editions come with optional components called XPM (Windows XP Mode, formally known as VXP (Virtual Windows XP)) and Windows Virtual PC, a virtual PC for Win 7 OS that allows you to run a virtual system for virtualization. You can run and access applications that are installed in virtualized XP instance on your Windows 7 desktop to enable backward compatibility.

XPM is simply a virtual system which runs Windows XP (pre-activated) that uses Windows Virtual PC features. XPM and Virtual PC possess improved functionalities which is why several Windows 7 users wish to have these optional components on their system.

The requirements of Virtual PC on Windows 7 are different as compared to Virtual PC 2007 (Service Pack 1). The main difference is that Windows Virtual PC needs hardware-assisted VT (virtualization technology) support. Microsoft has come up with KB977206 which helps users to hack Windows XP Mode and Windows Virtual PC so that they can be run without any hardware virtualization.

VT is a built-in technology in CPU processors. It is known as Intel VT in Intel chip while it is called AMD-V in AMD processors. This virtualization technology capability is incorporated into a tiny chip which cannot be removed or added manually. Even if your CPU possesses VT, you need to enable the same in BIOS.

A majority of recent CPUs posses default VT operation. However, some of the older CPUs running on OEM PC may not include VT. Without VT support, installation of Virtual PC might not be possible or it might not start working. You will be shown the below mentioned error message in such cases.

“Cannot Start Windows Virtual PC host process. Check the System event log for more details.

 Windows Virtual PC requires hardware-assisted virtualization. There is no hardware-assisted   virtualization support in the system.”



To check whether your processor supports VT, you would normally go through the list of Intel processor features or features list of AMD CPU. However, this might be pretty time consuming. Instead of doing so, you may confirm whether or not your processor supports VT by making use of SecurAble

SecurAble is a useful utility that displays the status of maximum bit length of your CPU, its DEP as well as virtualization support. You need to simply download SecurAble and directly run it. It does not require any installation. It will quickly display the status of hardware-assisted VT feature of your CPU. If it shows the status as “Locked On” or “Yes”, it means that you are free to use Windows Virtual PC.

In case it shows “No”, it means the CPU does not support VT feature. However, if you see the status as “Locked Off”, it means that VT support is not enabled in BIOS. In such a situation, all you need to do is, restart the system, go to BIOS configuration and turn on or enable the hardware virtualization support.


In case the hardware virtualization support is locked off or disabled in BIOS, you will see the below mentioned error when you try to run Windows Virtual PC component on your Windows 7 system.

“Virtual machine could not be started because hardware-assisted virtualization is disabled. Please enable hardware virtualization in the BIOS settings and try again.”



Apart from SecurAble, Microsoft’s HAV Tool is another utility that helps you detect the status of hardware-assisted virtualization support in your CPU.

Find out whether virtual PC for Windows 7 XP mode is supported your CPU

Find out whether virtual PC for Windows 7 XP mode is supported your CPU

Windows XP Mode and Windows Virtual PC (XPM, as previously it was named as Virtual Windows VXP or XP) are two brand new elective components for particular editions of operating system, Windows 7. The Virtual PC of Windows is the VPC or better known as Virtual PC for Windows 7.

For virtualization, it allows any user to open virtual machines with additional features, like XP Mode for Windows. It allows the user to run and access any applications that is installed in virtual Windows XP mode on the host desktop of Windows 7 for backward compatibility.

As Windows XP Mode and Windows Virtual PC have improved their functions and features, they are hoping to tempt more and more users for Windows 7. Well the requirements of Windows Virtual PC as well as the requirements for Virtual PC service pack 1 of 2007 have a huge difference in them. While the most remarkable change is that it requires hardware assisted support for virtualization technology, in short it is known as VT.

With the release of KB977206 by Microsoft, it has the capability to hack XP mode of Windows and Windows Virtual PC so that it can run virtualization without any assist of hardware.

One of the built in function of CPU processors is VT or hardware virtualization technology. If is it present in Intel chip, then it is called as Intel VT. However, if it is present in AMD chip it is named AMD – V.

The capability of virtualization technology is built on a very small piece of chip on the processor of a computer. It is impossible for any human being to remove it with any manual process. No matter what, in BIOS the virtualization technology should be enabled even though it is featured in CPU.

The feature of virtualization technology operation is a default feature for the modern computers and CPU. While virtualization technology does not support on OEM computers or for DIY, they may be in old computers or even new computers.

In this case Virtual PC of Windows fails to get installed in the machine and thus, it does not allow the starting virtual message. The following error message is displayed in a new popped up window:

Cannot Start Windows Host Process for Virtual PC. For more details check the event log of the system.

Hardware assisted virtualization is required for Windows Virtual PC. In this system it does not support the hardware assisted virtualization.



Now with the release of SecurAble, you don’t have to browse though the huge list of features for Intel processor or AMD processor to check whether your machine supports virtualization technology or not. SecurAble makes it very easy for all of us. SecurAble is very small yet powerful tool, which displays the DEP, Maximum bit length and even the virtualization support of the CPU.

You don’t have to install SecurAble on your machine. All you have to do is to download this small utility tool named SecurAble from the web site and run the program. After you run it, it will take as little as minutes to show you the status of your CPU including Virtualization Technology Support. If you receive a message as locked on or yes, then you can use the Windows XP mode or Windows Virtual PC properly.

If it is displayed No, then you can’t do anything. However, if it displays Locked OFF, then you have to enable the VT from the BIOS. Just reboot the system and on starting of the system, go to BIOS setting and in the Hardware Virtualization support, turn it on. All problems solved.

How Can I Fix Virtual PC Additions Problem On Windows Server 2008 Core

Workaround Fix for Installing Virtual PC Additions

Any standard or enterprise of Windows Server 2008 Core in a virtual machine that is using the Virtual PC 2007 SP1 gives one minute problem after installation. The problem arises when we try to install the Virtual Machine Additions.

When we try installing the VM Additions by running setup.exe, the installation fails and gets aborted or rolled back. This problem has a simple solution.

Before installing the VM Additions just disable the sound card workaround. As soon as you disable the sound card availability, the Windows Server 2008 Core will allow you to proceed with the VM Additions installation. This little adjustment will help you to successfully install this application into your system.

Windows VirtualPC Network NAT Mode Cannot Connect To Internet Problem

How to Connect To Internet in Windows XP Guest OS in Virtual PC with NAT

While using Network Address translation or NAT adapter on virtual PC 2007, by using Windows XP as the guest OS, it has been notice that the system does not get connected to the Internet. Then you will find it unable to use the system for browsing the websites with any of the web browsers, like the Internet Explorer and Firefox.

The problem while trying to connect to the Internet with the virtual machine having guest OS of Windows XP, takes place for no real reason, which is in spite the networking with NAT adapter working prior to the trouble occurrence.

However, some connections via protocols that do not call for domain name of translation, for instance secure FTP, FTP, SSH or telnet to remote server over Internet by means of IP address as an alternative host name, seem to work just fine.

The trouble seems to lie in Windows XP (which is functioning as a guest operating system) due to wrong DNS server which gets automatically assigned. The fault may also occur if the user had entered the incorrect IP address of the DNS server.

In this case, first confirm that the DNS server is really resolving a URL or domain name properly. Otherwise, you have to change it to the correct the DNS Server address in guest operating system of the virtual machine as per the DNS Server address entered in host operating system.

There could be another reason for the above problem, which is wrong assignment by the virtual networking adapter. If the network connection properties for TCP/IP protocol is set to obtain DNS server address automatically then the virtual NAT router will assign and allocate the same DNS server that’s been used by host operating system to guest operating.

Nevertheless, for some causes, the DNS server used might be wrong or invalid, such as in the case when the user switches or changes Internet connection which have dissimilar DNS server, or when user changes the Internet connection to new DNS servers devoid of restarting the horde computer.

What the come across this type of issue, you need to first shut down the virtual machines, and then restart Microsoft Virtual PC. The error will be fixed following that. Just in case you’re unable to shutdown the guest operating system for any reason, you have to configure and set a fixed DNS Server IP address manually in the TCP/IP Properties for Local Area Network (LAN) Connections.

Note: – If you are going to install Windows Server 2003 or 2008 or Windows Vista as a guest operating system in your virtual machine of VPC, then there will one more DNS Server caused, and it is not capable to connect or browse the internet. In such a case, the resolution to the issue would be to do manual settings for the DNS Server IP address, the IP address should be set as